SIFTING & CLEANING

Latest sifting technology for the separation of impurities and latex. A uniformed airflow and zigzag sifting principle secure the best possible sifting efficiency.

Tailor-made single and two-stage MDF Dryer systems, new installations and rebuilds of existing systems.

FORMING & MAT PRE-HEATING

PressBooster is a mat pre-heating system that increases mat temperature by injecting steam directly into the mat in front of the press. This enables a higher press speed, which increases plant capacity.

• Capacity increase 10 – 30% depending on board thickness.

• Easily installed by rebuilding existing conveyor.

• Dual belt cleaning systems.

• Improved board physical properties.

• Better surface smoothness.

STEAM RECOVERY

MDF steam recovery system. No moving parts, only using its shape and steam velocity to generate the centrifugal forces. Installed between refiner and resin system.

• 30% steam recovery, typically 1–5 ton steam depending on production capacity.

• CO2 and VOC reduction.

• Low investment cost.

• No movable parts.

• Removes bottlenecks in the energy plant.

• The cleanness of steam is further improved with its unique 360 design.

• Requires minimum installation space.

GLUING

Internal Resin Injection System. A revolutionary resin system that improves runnability and saves resin.

• The unique design of the Internal Resin Injection System system will ensure a superior resin and fiber mixing with lowered resin consumption and improved board properties as a result.

• Resin is injected in the center of the blow line by a nozzle arrangement replacing all nozzles for MDI and is replacing all, or most of the nozzles of UF and UMF dosing.

• The fibers are forced into the resin mist by the shape of the resin house.

• The fiber flow acts as a protection film and keeps the system, blowline and dryer clean using MDI, UMF or UF resins.

• The result is less use of resin and less need of maintenance.